You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
This is an actual finished product. I was able to purchase 20 and now they’re gone. No classics, chromes or LX’s are to be had through cobra, at this point, to my knowledge. Cobra had them on Amazon for a brief period and they’re out.
Remember when you didn’t have to think much because you’d been inside a Cobra 29 13.7 thousand times? Hashtag “GoodTimes”
Well, it’s still the same basic setup and, strangely, still no mosfet. Here’s a peak at the Cobra 29LX.
It’ll be fun watching...
I searched through them but all I could find was 6 pin Uniden 6 pin microphone color/pin out. I know which pins (1-6) are for what but I don’t know which color goes to which on this mic.
I could ave sworn Handy Andy posted it somewhere but, of course, now that I actually need it lol...
Been forever since I’ve had one but the V2 version normally had sticker on the box. It was a round sticker and it seems like it had a big number 2 on it or something like that. It had a mosfet in it.
The tricky thing is that Stryker mixed up the boxes or the labeling during the transition. I...
I’ve recently had 3 99v2 radios keying up when they shouldn’t. Normally, it’s an issue of two legs on the mic board shorting.
Recently, however, it has been an issue of the echo board pinching one of the wires that is soldered to the Band knob pot. These echo boards don’t have enough space and...
I’ve used the Weller wes51 for about 10 years. This is my second and it’s time to replace it. I’d like to upgrade. I’ve replaced the iron a a few times and many tips. They don’t last.
Recommendations for the best units under $300, please.
Mostly through board components.
***REPAIRED*** C257 crushed
(Oops-I don’t think I got the pic of c257 location in that graphic but it’s behind the swr board)
This was strange. Adjusting the SWR board did nothing. The board and pot were fine. After removing the board, I could visually inspect the main board. C257 was crushed...
Yes sir. I believe this is the 3rd new radio in the last month. It happens.
I’ve never had to dink with the board. Does the VR calibrate the warning light or the meter itself? I suspect if it calibrates the meter, the light will take care of itself.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.