• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. K

    Magnum S3 no receive volume

    My other account got banned for some reason so I had to make that one.
  2. K

    Magnum S3 no receive volume

    Who’s the magnum expert here. S3 no receive volume. On off pot was bent so replaced it no change. Receive is working meters moving transmit is good talkback works and PA works. Checked for broken wires and cold or broken solder joints. Any ideas where to look next.
  3. K

    Roger Fart in a Cobra 1000GTL?

    Those look like franks boards. There is another way to stop the Roger silence I do it on the solder side. I’ll have to try your way.
  4. K

    New cobra 29 LX

    Anyone play with the new 29 LX. It’s all surface mount now. Seems to be a turd. Any mods on it out there I can’t seem to find anything.
  5. K

    Galaxy 73v

    Anyone know how to bypass the fixed switch on a 73v. The fixed-10k switch don’t work so I’m stuck with the three fixed channels only. Any help appreciated thanks.
  6. K

    4600 turbo transmit/ receive light orange

    Pulled tr32 and it came to life but light is still orange.
  7. K

    4600 turbo transmit/ receive light orange

    Am/pa switch working. No solder blobs comes the board with the magnifying glass. Something keeping it from fully going into transmit. ‍♂️
  8. K

    4600 turbo transmit/ receive light orange

    4600 turbo with the 2290’s receive is good,has dead key no modulation. The T/R light turns orange not red when keyed. I’ve checked tr38, mic IC, D77 etc. any ideas on problem appreciated.
  9. K

    Anytone 500M

    Anyone know how to do the settings in the service menu. Press the up/down buttons while powering on brings up a menu but cant change anything in the menu. The problem is the RF meter is pegged on receive and doesn't show any bars on transmit, but radio is working perfect. Any help appreciated.
  10. K

    Topgun technologies predator

    Anyone have the schematic for the predator radio.
  11. K

    Connex 3400 program module

    Does anyone have a program module for sale. Connex 3400hp. Someone also mentioned a mod to not use the module. Any help thanks.
  12. K

    33hp2 ch19 on channel 6

    Nomad you were correct sir. IC7 when they done the conversion dropped a lil drop of solder and had two pins shorted out.
  13. K

    33hp2 ch19 on channel 6

    Thanks will check it out
  14. K

    33hp2 ch19 on channel 6

    Got a galaxy 33hp2 here and channel 19 is on channel 6, any ideas to save me some time before I start digging. Mabey someone has come across this problem. Thanks appreciate any help.
  15. K

    99V2 channel board

    https://www.ebay.com/itm/10PCS-DTA124EUAT106-TRANS-PNP-50V-30MA-SOT-323-DTA124-DTA124E-124E-DTA124EU-124E/193931342505...
  16. K

    99V2 channel board

    I was thinking the same thing, thanks for the reply... I have looked for that part and cant find it. mouser and Digikey has them but on backorder of course..
  17. K

    99V2 channel board

    Anyone know the part number for the transistor that goes in front pin three on the 99V2. See pictures below. It was burnt to a crisp. Thanks in advance.
  18. K

    Galaxy Saturn

    Checked those no dice. PA works but with echo on makes a bad hum.echo off nice and quiet.
  19. K

    Galaxy Saturn

    TR50 - TR51 both test ok..