Separate names with a comma.
I use WK3tools to program the buttons on top of the Winkeyer. https://www.hamcrafters2.com/WK3tools.html
If you want a logging program to...
I use this. https://www.hamcrafters2.com/WKUSBX.html
Edit...I don't have 101 but you plug the Winkeyer output to the Key jack on the 101.
If your 811 is the three tube model then 400w is normal. I had the "H" version with four tubes. No one your working can tell the difference in...
Prosistel will rotate up to 500 degrees https://www.prosistelshop.com/en/azimuth-22
I think the M2 positioners are only limited by the controller.
My Elmer is the club curmudgeon. Old and cranky. However, he has decades of experience in station engineering and operating (Three towers, 10...
The WPX contest are great fun. Scoring is like playing poker with wild cards.
Contacts with different continents on 10m, 15m, 20m =...
My two cents on the radios....The 701 will get you on the air and do a good job. It will not interface with a computer. You...
Many logging programs will automatically upload each contact you make to QRZ and LoTW.
They are very loud on the East Coast on 40m and 30m CW early in the morning. Great ops. They seem to be working up 5 more than up 2.
How true. Almost anything connected to a radio will make a few contacts.
I'll admit that I bought/built the 20m version of this antenna. The...
I worked them on 30 meters, July 4th, early morning gray line. ATNO for me.
Thanks. The map was quit a chore to put together. Had to find the Lat/Lon for all the 70,000 QSOs in my log!
If you like to chase DX then having your Extra is an advantage. Many DXpeditions will work frequencies below the US General frequency...
Below is a link to a QST article that does a good job explaining the misunderstanding of feed line length and SWR....
You can find the manual here http://www.pwcares.org/doc/FT-8800R.pdf
Page 30 shows you how to program the DCS codes.
Since you are in the groove keep studying and take the general test. The extra HF privileges are worth the effort.
Make sure menu item #1 is set to "ON". This is enables the "Extended Menu Mode". If this is set to "OFF" it will not show all the menu items.
Congratulations! You will enjoy HF.