Separate names with a comma.
Thanks !!!! Ive been looking for that I will post when i find the problem, I do think a misprint for tr 38 though i got the readings that are...
i would record him and let the rcmp have a listen obviously he has a severe problem
i normally ignore that stuff and idiots but you bring kids...
tr 37 i get on key up e.72 c8.5 and b0.0 --- 38--- i got 0.0e 9.03c and 9.1b
cross off the 5.5 at the end i was thinking ahead
tr 37 has me stumped my readings in recieve are 0.1, 5.5, and 0.6 c has 5.5
yes in recieve i will check the tx
Can anyone confirm if my last to checks were ok on tr37 and 38 ??
so you are just missing the lighting or is the whole radio dead? did you also check regulators??
no it is beyond that no recieve at all i tried the keying up to see if it is recieving and nothing... scratching my head on this one but i am...
i moved on to TR 37 and 38
TR37 0.1 5.5 and .6
TR38 8.5 0 and 8.5
TR36 i have 8.3 9.0 and 9.0 and definately not in an easy spot to get at
scratch that ic9 is tx mixer
after looking more IC 9 has my attention i know sometimes manufacturers will cover the part numbers, I am curious if this might have gotten too...
tr 17 checked out with the voltages you posted tr 18 is a little higher 2.8 source 8.8 drain and 0 on the gate.
windy and cold we get all the weird weather here in ohio it can be 60 one day the 20 the next
ok tr17 checked out good i even replaced it with an nte 107 still nothing
Im going to check it it once the radio room gets warmed up
I have a +3B turner it works great i done a complete restore took it all apart i did replace all caps and 90% of the wiring the mic was...
found one on ebay it is a nice little radio it comes wit hi/lo power am/fm 120 channels scan and dw , i have been buying the 77-285 for awhile i...
i have had problems with cold solder joints int the 2950 board usually at the regulators a few times the regulator itself was bad. the 2527...