Separate names with a comma.
Take the tubes out and put a new fuse in. See if it powers on without tubes. It should. If it blows fuse it's not tubes.
If lights are not dimming on AM but are on SSB peaks I would start at power supply, the power cord, then plug on back of radio and work your way...
Did you try a different power supply?
The reason I ask , I had a radio that worked great on AM and on SSB it had a warble. Full power on all 40. Chased it for a year . Someone told me...
I would have bet that the mod I showed would have fixed it. Did you check the vco voltage?
Any time. It's easy and it works.
Faster than going through my mess. Gotta love YouTube
The Malaysian 148 is the same as the earlier ones with the exception of a trace on the regulator. If I remember you need to make a cut and put a...
As long as it's the correct value and it will fit in the spot it will work
All these posts and nobody has mentioned his pinky fingernail.
Comes with 776 mic and owners manual.
I have a mkivA all done. 100% all new caps high and low voltage. And when I say all I mean every electrolytic in the receiver and transmitter is...
Trust me. Buy a side mic Cobra 148, Uniden Grant XL or any Uniden Cobra Realiatic SSB radio from the late 70s to mid 90s. If you need power add an...
First mistake was buying a Galaxy.
Just replace them with new ones.
Those yellow resonators go bad. I know you said you tapped them. Tap them again and see if you hear static.
Those Fuc@#@g cbr's are a bunch of A$$HOL#$. No good dirty rotten C0@K SUC#ers.
Radio is gone !!