Separate names with a comma.
the mic had all the wires broke in it , thats why i have to rewire it
it does but i am wireing the sra-158-4h connex/texas ranger mic for a stand 4 pin cobra radio
where does black go as it is got 5 wires in the mic it self
how to wire up a texas ranger /connex mic to 4 pin
i have this radio it look great with a blue swr meter in it , great talking base radio
my Galaxy SSB Melaka has the 99 board in it it only put out 4 watts now it puts out close to 25 on am , we replace the 1969 final which was bad ,...
i know own one these radios and was wondering what band is cb abcdef
nah it ant his only choice , they make a noise device that goes in line or make a balin , i have made a balin and use pvc pipe zip ties and coax...
all right it will take me a bit as my truck is my current project
check all the diodes and the finals
its easy to rewire back to stock
the info below for president Washington .
ya need to check out what they have in mods for the 148gtl 5 pins same board , same mod s for modulation , ya can change a couple of diodes to up...
They say its finals have given out check all the diodes and little parts on the board also may have a loss solder joint , to found if you have one...
i agree with robb on that , i do the cover-ion to the mossfet 2030's n and f , instead of 20 watss you will get 40 or 50 depending on how you tune it
i posted the pictures so you guys could see the board and chip set
The 40 channel conversion the top pic and the board is on the bottom
other then internet where can you get those parts at , radio shack
what do you do if ya cant get the en-369fn at radio shack