Search results

I have a NOS Shure 577C that I am trying to wire for a 4 pin Cobra/Galaxy and have ran out of hair to pull out. So far the closest I have gotten is the following: 1-black, 2-green and black, 3-white, 4-red. This will key the radio but there is no audio. 1-black, 2-green, 3-white and black...

I recently picked up two NOS Turner mics that look very similar on the outside but are different inside. These things are built like tanks. I have re-wired both to 4 pin Cobra/Galaxy and they sound good to me on the air. The LMM Landcom mics were originally made as direct replacements for...

Is anyone using any of the Shure handheld mics? Just looking for information/opinions on what model(s) to try. I have been seeing models like the 405, 414 and 577. I appreciate any input. Thanks.

I have several Turner hand mics and want to put new cords on them and wire them to work with the newer radios. When taken apart, there is all sorts of variations on how they are currently wired. Can anyone please tell me if the mic wiring labeled in the photo looks right? That is the old cord...

I have a Grant XL that appears to be deaf. Transmit is fine (typical stock 4w AM/12w SSB). The stock microphone seems fine and sounds good on my monitor radio. An external speaker also has no sound nor static. The PA works fine. The meter does not move for RX. Any assistance to point me in some...

Not sure who left the microphones unsupervised………………..

What is the best thing to use for a sleeve on the cord when installing a mic jack on a small diameter cord? The cord is the same size or slightly less than the plug even fully tightened. The strain relief boots I find are not made correct for this. Does anyone make tubing specifically for this...

Does anyone know the correct wiring for installing a 4 pin Cobra on an Expander 400? Thanks for any information. -Jim

Here are a few screenshots from the PC programming that comes with the DX-5000. Also, the noise reduction circuit (separate from ANL/NB) is really amazing. I can not believe how well it works. Each band can have 60 channels programmed. The D band is normal CB when converted. Everything is done...

Well I couldn’t just sit by and watch everyone buying new radios, so I joined in.

Looking for a complete remote mounting kit for the Icom 7000 or just the separation cable alone. Thanks.

Several 575 mics. One (1) still sealed in a coffee mug from Astatic (some kind of promotion). $300 One (1) like new in the box. $175 One (1) no box very good used. $100 One (1) Road Devil ...Black, not red. New in the factory pack. $65 Also have a few Turner hand mics if anyone is...

I have several radios for sale: Ranger 2970N2 Ranger 2950 Stryker 955HP Magnum S9 Magnum S9175 Ranger 2980wx Ranger 2995dx President Lincoln (2) Uniden HR2510 (2) President George (3) Emperor 5010 (2) Uniden Grant (2) RG-99 Connex 566SB RCI 3900HP if you see anything you might be interested...

I have a 955hpc and the volume of the internal speaker is not loud enough, even using as a base. Never had this issue with any radio, but did read that the radio had a small internal speaker but never any posts about lack of volume. Is there anything that can be done? What about the amplified...

Looking for a NOS or mint Emperor 5010. Preferable with box and all original accessories. If you have anything please PM me. Thanks.

Looking for a NOS or mint President George and a President Grant DX. Please send me a message if you have anything. Thanks.

Needing to re-wire some older hand microphones with new cords. Does anyone know a vendor for a strain relief boot to go at the mic to transition down to the smaller cords? I have the tubing sleeves to go at the plug end so the plug will clamp correctly. Thanks for any information.

Have a 95t2 for sale. Like new, box, bracket, stock mic, accessory pack, etc. Probably has 3 hrs of talk time on it. Can email pics to anyone interested. Price is $320. Great radio. Came from Sparkys. One item is non stock, I shortened the power cord to use quick connects for power cable already...