• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. R

    Chipswitch Features

    Chipswitch Features 30 MEMORY CHANNELS WITH TEMPORARY CHANNEL LOCKOUT AND REPEATER OFFSETS The original HR2510 / HR2600 / HR2830 / LINCOLN has basically one memory available to it in the sense that it remembers the frequency you were last on during a power interruption. The CHIPSWITCH...
  2. R

    HR2510, Lincoln and HR2600 11m (US CB Radio) Conversion information

    To convert the HR2510 to 11 Meter operation: Remove the cover on the speaker side of the radio. You will need to loosen the 4 screws (2 on each side) that secure the SYNTH PCB Frame to the chassis. - You do not need to remove these screws - You need to remove the 4 screws that secure the SYNTH...
  3. R

    Dynamo Gold 150 (dual MRF455) Schematic needed

    I have seen someone post this model before, so it cannot be a totally obscure amp. I feel it is a classic dual MRF455 type amp, so really any schematic with that transistor set will probably be close enough. This amp has no output, the MRF455's seem ok. Nothing is visually burnt. It was...
  4. R

    Palomar 300 mobile amp w four MRF455s need schematic

    working on a Palomar 300 mobile amp w four MRF455s, I need the schematic, the keyer board is damaged. RX amp and TX not switching. Roger
  5. R

    Authentic Chipswitches for sale + install Nov 2020

    I have Authentic Chipswitches for sale + install (Nov 2020) You can email me: Rogerbird1 @ Aim . com Roger
  6. R

    emperor schematic??

    9001 Schematic. Try here: http://hamradio.online.ru/ftp2/dw.php?sch_alan-9001.zip Roger
  7. R

    Manual For Sencore Super Cricket TF46 Transistor Tester?

    I have a TF46 and Manual. I can copy it for you. If you Email me your Postal Address, I will send you a copy. Does yous have AC power capability? (with the PA202 Power adapter??) or is it just Battery operated? Mine is Battery only, but the manual shows an option for AC power...
  8. R

    hr 2600

    You said the radio was Modded.. I am guessing it had a Xtal Mod?? Make sure the X302 xtal is a 22mhz Also Check the Microprocessor , If it is a UC1251, it is that original HR2600 Micro, If it is not, it may have been replaced with a 2510/Lincoln micro, or a chipswitch. See if that...
  9. R

    Manual For Lincoln

    I have one scanned available here: rogerbird.tripod.com/diagrams/lincoln_om.html Roger </p>Edited by: <A HREF=http://p067.ezboard.com/bworldwidecbradioclub.showUserPublicProfile?gid=rogerbird1>Rogerbird1</A> at: 11/2/04 10:49 pm
  10. R

    Alan 9001 final problem

    Hi, Sorry to hear of your troubles. First of all, If your going to try to use a 2SC1969, for a final, you MUST use the Insulator. The Mounting tab CANNOT be grounded. In the 2SC1969 the mounting tab is the Collector, in the MRF477 the mounting tab is the Emitter. You probably will not...
  11. R

    HR2510 clicking from microphone

    Hi, Nope never run across that one before.. Has this radio been modified to remove Talkback? If so I would check the mod. If not, I would Check the 470uf inductors mounted on the Mic jack board, see if they are burnt. Other than that, Check for voltage on the Mic jack pins, and...
  12. R

    Cobra 148 GTL-B Freq Alignment info needed

    Hello, Anyone have the SYNTH alignment info on this radio? It is a 60 channel Cybernet chassi. I need to align the SSB and AM. Thanks, Roger </p>
  13. R

    President George Help!!

    Hi. Had a similar prob, but once programmed its there.. Start: Press power, PA, and dimmer keep these pressed down and the code button flashes keep your finger on these three buttons until the screen goes blank and then press M1 and then turn the radio off: this will give you the...
  14. R

    No AM transmit SSB ok

    Hi, How much output are you getting on SSB? Roger </p>
  15. R

    40 CH CB but only 1 CH

    What kind Model/make is the radio? </p>
  16. R

    Lincoln Receive mod

    See these pages for more info: Board Layout.. or Component layout... or here: Full Board layout Roger </p>
  17. R

    2510 power seems to be dropping. Final or driver?

    HI, It is normal to see a lower PEP when adding an insulator. The only explanation I have for it, is that with the insulator, you are no longer suceptable to the "RF Feedback Ground Loop" Problem, which I believe may have been causing 'false' PEP readings (higher than Actual) due to the...
  18. R

    Re: help for buddygunzz's 2510 problem

    You Wrote: "I have sound and rx now...found a bad solder joint from IC107 to the board...... still have no transmit, nothing on the meter, sound does mute when i key..have power from Q125, nothing to IC106, R172-R173-R174 according to the schematic..but the block chart shows something...
  19. R

    Lincoln TX problem

    Hello, I hope I can shed a little light on this. It is possible your TX troubles are caused by a bad Capacitor. There are a couple in the radio that are low rated. 10v instead of 16v or 35v capacitors. They can go from slight pwr surges or from 'Old Age' because they are in circuits...
  20. R

    Lincoln S-meter

    Hello, What is the output power of the radio on AM and SSB? Can you check the RF Power meter when keyed into a Dummy load? Does it go all the way up? Does the SWR meter CAL adjust? What is your SWR on your antenna (using an external and the internal meter)? Roger </p>
Top Bottom
Back