• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. B

    GALAXY DX-33HP2

    CAN SOMEONE PLEASE TELL ME WHAT THE FREQUENCY MOD IS FOR THIS RADIO. THANK YOU.....
  2. B

    Cobra 2000 gtl echo board install help !!!

    Wanting to install trbx3 echo board in my cobra 2000 gtl and have a couple questions. I know pins 2 and 4 are ground so can I use either or both for grounding for the echo board? The instructions shows pins 2 and 4 as ground pins. Also where is the beter place for the 13.8v switched power. Thank...
  3. B

    STRYKER SR-655HP

    Can someone please tell me where I can find a 8v transmit voltage on this radio. Going to install RFX-150 and need an 8v transmit voltage. Thank you
  4. B

    STRYKER SR-66HP AND RFX-150

    Could I use the rfx-150 on my stryker sr-655hp or would it be to much drive for it? Thank you....
  5. B

    Stryker sr-655HP HELP PLEASE !!!

    I have a new stryker sr-655hp on the way and need to find out what vr's to adjust for modulation, am hi power, am low power and how to install a swing kit in this radio. Is the stock mic best for this radio or a power mic. Thanks alot for any info....
  6. B

    Galaxy DX-2527 please help !!!

    Ok I was talking on my galaxy dx-2527 last night and it was working great like always. I went to key it up and noticed out of the blue it started going to max power on watt meter with no modulation. It use to deadkey 1 watt and swing to around 30w. Now when I key it up it goes straight to 30w. I...
  7. B

    New Uniden pro 510 XL

    I have one of the new Uniden pro 510xl radios with the new style board. I figured out how to adjust the power but could someone please tell me where the mod limiter is in this radio? Thank you a million for any help...
  8. B

    Dak Mark 9 signal meter !!!

    What would cause the signal meter to go up when someone gives me a deadkey like normal and then when they modulate it swings backwards instead of forward like it should. Seems like the farther away the station is the less it does this but close stations it will swing backwards 1-2 dbs when the...
  9. B

    Magnum sx-175

    Can someone tell me where I can tap into 8v on transmit on a rci-2950 radio? I am installing the magnum sx-175 on it and need a 8v transmit source. Thank you....
  10. B

    Magnum S-680 Help Please !!!!

    I got a nice condition magnum S-680 with the 4 2030 mosfets in it. Suppose to be a 80 watts radio and the lights are all green on this one. I am having several differnt problems with it. radio powers on all lights come on and radio receives great but has no transmit at all non. Second problem is...
  11. B

    Need tube help please

    I need to know what tubes will cross with a 6L6GC tube. That is the tube in my dak ix and it is suppose to be a 6DG6GT. Will those tubes cross or has the radio been modded to take the 6L6GC tube. Thank you....
  12. B

    Capacitor help please !!!!

    I removed this cap from my dak 9 radio because the top was rounded like it is bad so im wanting to replace all 3 of these caps in the rf section where the tubes are. here are pics of the cap. I can't find them anywhere.
  13. B

    Dak Mark IX question

    I got a beautiful looking and working dak 9 today and it works perfectly the only problem im having is the dead key. The radio is dead keying 8 watts and swings over 20 and i need to turn down the deadkeyto around 2-3 watts so I can run my box with it. Thanks for any help......
  14. B

    FS: Cobra 29 LX chrome, Uniden 78LTW

    I have a new in box Uniden PC-78LTW. Radio has been remove to be peaked & tuned and swing kit installed. Very loud talking radio new in box take 100.00 shipped. Also I have a Cobra 29 Lx chrome in good condition peaked and tuned with swing kit. Comes with factory mic, mounting bracket ,wiring...
  15. B

    Galaxy DX-2527 echo

    I have a galaxy dx-2527 base and the problem I am having is the echo. This radio has 2 knobs on the front face one for echo and one for time. The problem I am having is when I just crack open the echo everyone tells me I have to much echo and I can't turn it down anymore on the front. Is there...
  16. B

    Galaxy ssb melaka variable power

    Can someone tell me how to add variable power to this radio? I would like to put the pot in the phone hole on front. Has the 3600-14b board.Thanks....
  17. B

    Galaxy SSB Melaka HELP !!!

    I bought this radio and it looks nice but everyone keeps telling me that the modulation is over driving and some say that their meters actualy goes backwards when I modgulate. Im thinking that someone may have removed the mod limiter in the radio but I don't know what or where it is in this...
  18. B

    New Super Penetrator 500

    I just ordered the new spt-500 and was looking over the instructions and noticed that they say to make it 19' long. I thought I read somewhere for 11 meter 22' was where you needed it. can someone come in here and clear this up for me I want to get it together the right way. It also says to make...
  19. B

    RM ITALY KL-503 HELP PLEASE !!!

    I have a rm Italy kl-503 amp and now my preamp isn't working correctly. When I turn on the preamp my signal drops down to nothing and when I turn it back off it goes back to normal. But it defintly isn't boosting the signal like it use to do it kills it now. Thank for any help....
  20. B

    Voyage VR-9000 SSB

    Hello hope I can get some help here. I have a VR-9000 and AM works awesome swinging to around 35 watts from a 2 watt dead key. The problem I am having is on ssb. When I key up on LSB or USB the radio goes to full power. I know ssb doesn't have a carrier and only swings up with modulation added...