• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. KD2GOE

    WSJT-X Website has been down for a week?

    I was trying to downland WSJT-X on my laptop for some outdoor radio fun and the website for WSJT-X "physics.princeton.edu" has been down for all most a week? any one know what's going on?
  2. KD2GOE

    Icom-7100 RF tap Pan-adapter complete

    I don't post over here much any more but would like to share this with every one.. Ones you go SDR waterfall you never go back. It worked so well in my Kenwood TS-2000 I had to do it to my Icom IC-7100 so I Installed an RF Tap buffer and it works well from HF TO UHF This is tapping in to the...
  3. KD2GOE

    Running some FT-8

    guy I know keeps burning up power cords so I made this.
  4. KD2GOE

    MFJ-939 Antenna port x2 MOD

    1 thing got my eye when i was looking at the inside of an MFJ 939 Tuner because you just need to look inside. There is a missing relay and what looks like provisions to switch between 2 antenna ports. the software in the tuner still switches that missing relay when you switch it from Memory bank...
  5. KD2GOE

    Problem with a mega watt PSU S-700-12 50 Amps

    I'm getting a tremendous amount of noise on 160m and 40m some on 80 and 20 Any one with 1 of these supplies and fixed this I combined the negative and the Ground that helped a little bit maybe cut it in half.. i have the 36 amp ver and that one is fine i have more then 1 radio and im pushing...
  6. KD2GOE

    Making a 80 to 10 endfed

    looking to coppy a MFJ-1982MP does any one have one? I just need to know the tube diamtor and coil turns for the 10 meter coil. Thanks.
  7. KD2GOE

    Yaesu ft 891 portable on 12v

    Any one run the Yaesu ft 891 on a lead acid battery for portable I have a big deep cycle But I want to know how the radio behaves when the voltage sags down to 11.5v i know a lot of the radios are more happy at 13.8 I have seen and had some radios just not like running at 12v they start acting...
  8. KD2GOE

    N2YLD Eugene Harrington

    If you follow Louis Rossmann he hired this guy as a contractor that rips people off.
  9. KD2GOE

    Lincoln 2+ Power adjustments

    looking in to getting a Lincoln 2+ in a few day but i want to make sure i can turn down the power inside so i dont blow up my KL-503 that i turned in to a high drive so it can take 25W in to get full power out ect. Are the AM, FM and SSB power adjustments labeled on the PCB? if not any one have...
  10. KD2GOE

    bird 43 nuts

    What is the thread size pitch for the studs and nuts on a bird 43 meter? 10-32? Thanks
  11. KD2GOE

    looking for RM italy kl 503 HD Schematic

    Any one have High Rez pics of the inside and a schematic of the KL 503 HD it looks like for some unknown reason the adds say it is still 1 driving 8? i am guessing they added more padding to get the "35 watts input drive"? to me it seems like just removing the Driver like i have done would had...
  12. KD2GOE

    What is this taking up a big chunk of 40 meters?

    the single is 10kz wide.. what is this??
  13. KD2GOE

    Super Penetrator coupled with a icom AH-4

    i was thinking to my self i don't see why this would not work great on 10 and 15. 10 being a 5/8 and 15 being a 1/2 wave. and 20 and so would load up good on it... people even load up 40 on a 102 whip with this tuner.. MY Imax 2k is dead and i was thinking of getting a Super Penetrator but i...
  14. KD2GOE

    using my Radio over the internet...

    i have my TS-2000 connected to my PC using omni-rig i can run digital modes PSK31 FT8 all that fun stuff. I was talking to a guy on 10 meters he was at work using his radio. but his radio is an icom 7100 and he was using icom software to do it. i am sure they make software i can run on my...
  15. KD2GOE

    Bird 43 Thruline Wattmeter "Slugs and PEP 1x2x5x kit"

    I ordered a Bird 43 meter online and 2 slugs they will be here Thursday Are the PEP kits that give you 1x 2x 5x a bad thing to get? will they mess up the readings? i am guessing if calibrated they are fine. I was thinking if i get 50w Elements that will cover 50, 100, 250w i don't need ant thing...
  16. KD2GOE

    General Stonewall Jackson Power supply help

    i'm working on a General Stonewall Jackson for a friend it needs a new set of 2n3771 not a big dead i have them but on the supply board are 2sb827 transistor and a KA7808 transistor the radio has the same PSU as the RCI-2990 and the saturn galaxy turbo.. i cant fined the schematic for the psu...
  17. KD2GOE

    Glitch in the matrix on FT8

    i was working some FT8 on 6 meters and there was a glitch in the matrix LOL
  18. KD2GOE

    Modifiers for amateur radio call signs

    Is there a list of i don't know what to call them "Modifiers"? that you use with your call sign for if your running off Battery generator or your not at your home location's ect?
  19. KD2GOE

    Coax loss

    Well I did a power test on 446mhz on 50'.. Testing at the radio I got 23watts Testing at the other end I get 13w I am loosing 10w through coax loss.... Is this excessive or something normal? This is the coax http://www.davisrf.com/buryflex.php
  20. KD2GOE

    End fed 40/80 help

    Friend has this 40/80 antenna and I am a bit confused on how to feed this thing. The coax just plugs in to it there is no unun or balun on the end or a way to attach a counterpoise. Hope this link works..