You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Thanks guys for all the help. I wound up sending it out. Just got it back it had a few bad caps and the 5k pot on the am power was bad. But I did find out that the clarifier was already open and it had some low channels in it too. I had the meter replaced and it converted to a 4 pin. Now she's...
Thanks guys. Seeing as how I don't have the equipment to test looks like I'll be dropping it off to my local guy and let him have a go at it. Thanks again
Ok jumped out the pa switch and no difference. dont know where to go from here. How can I tell if the element in the mic is good? I've got continuity from the switch to the pin on all 5 and the switch is good. I don't know if there is anything else to check? In the mic or in general.
Hey guys, This is my first post in here.
I have an older (March 89) cobra 148 gtl. I've been having problems with it and I'm hoping I can get some help here. When I first aquired this radio it turned on with no transmit and no recive. After messig with it for a while I found the cb pa switch...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.