You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I have a good talking Cobra 29-LX-Max radio with extra channels and the whole 9 yards. It's a real good talking radio but the backlight went out and now I can't see the channel display. The display is working good it changes channels and all but can't see what channel I'm on. Can anyone point me...
Add 80 channels to Your 40 channel radio. This kit will give you 40 channels below one and 40 channels above 40. It goes from 26.51 up to 27.85. It's a simple 3 wire hook and comes with easy to follow online direction. I have included a picture of what radios this kit will work in. The kit comes...
Hi, I've been trying to make a variable talkback for a Cobra 29, 25 n others but none of the ideas I've tried worked out very good. I tried hooking it up on each side of the resistor, inline with the resistor but none are very stable. Could someone help or post a diagram on how to make a good...
The radio transmits very well, but I have no receive at all. The meter doesn't even move even keying up another radio in the same room. I checked all the basic things like speaker, mic even change the audio chip still nothing. Can anyone tell me what to check next I'm lost lol. Thank you very much.
I learned how to make the Expo A Kit, but looking for a diagram for the Expo S Kit for a few Cobra 25's n Unidens I have. Could someone please post a diagram on building one?
Thank You....
I'm installing extra channels on a Washing PLL 8719 but not sure on the pin numbers like Pin 1 2 3 etc, could some explain please and a pics would be very helpful.
Thank you
Hi, First off I hope I'm posting this question in the right area. OK I traded for a General Lee radio. when I got it, it wasn't working. I replaced the driver the one all the way to the right with the solder side of the board up. Well I know there was a diode placed inline. I still have the...
I have a Cobra 29 and when I put power to it, it'll burn up D-8. I've checked a few things around it but I have no idea where to look now. I'd very grateful for any help finding the problem.
Thanks Again.
The amp is in good working condition. The switch in the back needs replaced for the Preamp. It's showing 1000+ on my system. Asking $400 Or Best Offer plus half on shipping, I may trade also. If interested let me know.
Thanks
I traded for a home made power supply which works very well. It's pretty heavy and looks to be very well built. Well any way my question is how can I check and see how many Amps it is? I tried it out with a Galaxy 33 and a 250 watt amp and it ran both of them with out any problems, but still...
I've been reading about the VFO Windup on the net. I have a 2013 Cobra 29 LTD Chrome. What I read was put a 470 + side of the Cap on the Strip side of D18 the - to ground. I done that but nothing happened. I even tried a 220 n a 33 Cap nothing seems to work. Could someone please explain and let...
ThunderBolt 101 Base Amp Looks And Works Good. Has Rec Amp/Preamp, Hi/Low Power Settings, AM/SSB Modes And The Meter Works Also. Good Working Clean Amp. Make A Good Modulator Or A Driver.
$185 Or Best Offer. Free Shipping & Free Local Pick Up.
Vintage Mongoose 450 With Upper/Lower Channels Works Good Made In The Philippines. We checked the radio out and it transmits and receives very well. The Upper/Lower Channels are located on the light dimmer switch. It works good on the 40 and lower channels but has a problem with the uppers. We...
I have two Cobra 29 Classic's. One has low modulation only swings like 6 watts with the limiter clipped I have no idea what is going on with it. I have another one is barely showing modulation and what little it is showing it swings backwards. Can anyone help me with the problem with one or both...
I've tried both and different values on resistors but never been able to hit the 40 watt mark like they say. I've used the 520 n the 2030, which one is the best to use? I can't really tell to be honest. The 2030 says a 30 watt final and can't find any specs on the 520. The best I have ever got...
Could someone please explain how to wire/install this board? I tried but no luck and don't want to damage it or my radio. I'd be Grateful for your help.
Thanks
P.S. I hope I posted this in the right area if not I'm sorry.
on 11 meter the Frequency Counter on channel 20 is showing 24.630 and the lat two numbers keeps changing can anyone explain how to repair this problem please
Thanks
It swings around 450 with my Cobra 29. The Pre-Amp works good also. The amp is in good working condition and also looks good. Sale for $225 Shipped. We only Ship to the U.S. Let me know if your interested.
Thanks
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.