• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

How to modify Vertex VX-230

dag008

Member
Oct 17, 2010
2
0
11
Hello guys... I just was reading an old forum "Rx/TX extended range for Yaesu Vertex VX-7000" and I see that you have the pasword for some of the vertex software "ansho-bango"
it also works on Vertex 410 and 2200, I used this passw to modify those radios and I made on 220-290 Mhz, it was great, but now I´m trying to modify de vertex 230 model, but I can´t find de way to program this model. I need to program it first to start with the proces of modify the hardware, I need the new password used on the ce99 software. does you know this new password or some one else? if you need some info or if you want to modify one of those models I can send you al the info that you would need... Thanks
 
Last edited:


dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    2022 Aug 08 0839 UTC EXTENDED WARNING: Geomagnetic K-index of 5 expected Extension to Serial Number: 1656 Valid From: 2022 Aug 07 1428 UTC ... Now Valid Until: 2022 Aug 08 1500 UTC ...Warning Condition: Persistence
  • @ BJ radionut:
    Potential Impacts: Area of impact primarily poleward of 60 degrees Geomagnetic Latitude. Induced Currents - Weak power grid fluctuations can occur. Spacecraft - Minor impact on satellite operations possible. Aurora - Aurora may be visible at high latitudes, i.e., northern tier of the U.S. such as northern Michigan and Maine.
  • @ BJ radionut:
    A Index = 24:mad: almost Blackout level...sig/noise ratio F'd up