• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Notice: You may not use this site to facilitate the unauthorized selling of copyrighted material including, but not limited to, in the public dxForums, dxGallery, dxChat and private messsages. If you get caught doing this, you will be permanently banned with no second chances. A notice will be placed on the site of why you were banned and any information collected by this site about you will be made known to the copyright holder.

HR2600

Cabover Bob

567 on the west side
Nov 17, 2020
381
613
103
111
I have a nice condition Uniden HR2600 that I'm considering selling. It has a very small crack in the faceplate between two keypad openings. It is still boxed up from being in the hands of Roger Bird, I can get pics later today if there is any interest. I do not have a mic wired up for this rig yet, but I do have a couple at Superior CB for various repairs, one will be getting channel buttons. I will include it, the original bracket and a new power cord.

From RB :
Todd,

The radio is finished.
The receive came up +14 bars ! and I have aligned the tx and RX and set center slot on the RIT..
Adjusted the BIAS, and set the TX too 40 - 45w SSB and 15w AM dead key.
I ahve turned up the audio, and installed an external speaker jack.
I replaced the Cpu capacitor and removed the all the bad glue.

the work is as follows:
Chipswitch and socket $90
installation $40
External speaker $25
-------------------------------------
= $155
shipping and insurance $20
----------------------------------------- Total: $175 :end

I have around $275 invested, and I realize that I may not recover fully, so I am open to reasonable offers.

Todd
 
Last edited:

Cabover Bob

567 on the west side
Nov 17, 2020
381
613
103
111
Here's a few pics.

Todd
 

Attachments

  • 20220411_083437.jpg
    20220411_083437.jpg
    2.9 MB · Views: 38
  • 20220411_083357.jpg
    20220411_083357.jpg
    1 MB · Views: 37
  • 20220411_083443.jpg
    20220411_083443.jpg
    7 MB · Views: 31
  • 20220411_083449.jpg
    20220411_083449.jpg
    5.7 MB · Views: 31
  • 20220411_083508.jpg
    20220411_083508.jpg
    976.8 KB · Views: 36
  • Like
Reactions: Shadetree Mechanic

Cabover Bob

567 on the west side
Nov 17, 2020
381
613
103
111
This rig is boxed up and ready to be shipped to your van down by the river, who wants to make a deal ?
 

dxChat
Help Users
  • No one is chatting at the moment.