• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

s-meter

Sonwatcher

Active Member
Apr 6, 2005
3,413
25
48
Colorado
I have a Uniden Grant that the S-meter neither moves nor lights up.Does anyone have any pointers as to repairing this ? I did connect the 2 wires to an s-meter I took off a swr/mod meter and it did not move.



Thanks,

Ron


sonwatchersig.gif


CDX_3.gif




God bless you all !



CDX-897

OT-897

WV-897

CM-2368

American Kangaroo-1897</p>
 

I have a Uniden Grant that the S-meter neither moves nor lights up.Does anyone have any pointers as to repairing this ? I did connect the 2 wires to an s-meter I took off a swr/mod meter and it did not move.



Thanks,

Ron


sonwatchersig.gif


CDX_3.gif




God bless you all !



CDX-897

OT-897

WV-897

CM-2368

American Kangaroo-1897</p>
 
ron,does it read on TX? AM or SSB,deadkey/swing of any kind? Also,are you sure you're putting the SRF/CAL/SWR switch in the proper setting? one more thing,could be the VR

pot has been turned down so as not to show any reading.

no light;i would put a VOM on the wire leads and check for voltage.(12VDC approx)

also,a different meter may/or may not work w/that radio!

many radios have different "values" for their respective meters.

Slim


slimsig.gif
</p>
 
ron,does it read on TX? AM or SSB,deadkey/swing of any kind? Also,are you sure you're putting the SRF/CAL/SWR switch in the proper setting? one more thing,could be the VR

pot has been turned down so as not to show any reading.

no light;i would put a VOM on the wire leads and check for voltage.(12VDC approx)

also,a different meter may/or may not work w/that radio!

many radios have different "values" for their respective meters.

Slim


slimsig.gif
</p>
 
Slim,

This is the plain Grant with no swr calibration.It doesn't move at all. Just dead and no light.


sonwatchersig.gif


CDX_3.gif




God bless you all !



CDX-897

OT-897

WV-897

CM-2368

American Kangaroo-1897</p>
 
Slim,

This is the plain Grant with no swr calibration.It doesn't move at all. Just dead and no light.


sonwatchersig.gif


CDX_3.gif




God bless you all !



CDX-897

OT-897

WV-897

CM-2368

American Kangaroo-1897</p>
 
Ron,

It sounds like a dead meter. I have several meters here and you would be welcome to have one. I would just need to know what size and so forth. The light is probavly just burned out and I could send you one of those as well.

Let me know and we can go from there.

fasteddy


</p>
 
Ron,

It sounds like a dead meter. I have several meters here and you would be welcome to have one. I would just need to know what size and so forth. The light is probavly just burned out and I could send you one of those as well.

Let me know and we can go from there.

fasteddy


</p>
 
i agree w/fasteddy. did you check the VR pots to see if they've been turned down ron? also,are you saying the meter doesn't work in any mode?(TX or RX)

if yes to all,then take up ed on his offer!!LOL!!!

good luck sir!


slimsig.gif
</p>
 
i agree w/fasteddy. did you check the VR pots to see if they've been turned down ron? also,are you saying the meter doesn't work in any mode?(TX or RX)

if yes to all,then take up ed on his offer!!LOL!!!

good luck sir!


slimsig.gif
</p>
 
Ed,

Thanks a bunch ! A rough measurement 1 1/2 x3/4. It may be very slightly smaller but not much. Send me an email if you think you have one. Thanks again Ed ! And thank you too Slim.


sonwatchersig.gif


CDX_3.gif




God bless you all !



CDX-897

OT-897

WV-897

CM-2368

American Kangaroo-1897</p>
 
Ed,

Thanks a bunch ! A rough measurement 1 1/2 x3/4. It may be very slightly smaller but not much. Send me an email if you think you have one. Thanks again Ed ! And thank you too Slim.


sonwatchersig.gif


CDX_3.gif




God bless you all !



CDX-897

OT-897

WV-897

CM-2368

American Kangaroo-1897</p>
 
Ed,

I got your meters today and put one in with the lamp, works GREAT ! Thanks a bunch, friend ! <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)">


sonwatchersig.gif


CDX_3.gif




God bless you all !



CDX-897

OT-897

WV-897

CM-2368

American Kangaroo-1897</p>
 
Ed,

I got your meters today and put one in with the lamp, works GREAT ! Thanks a bunch, friend ! <img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)">


sonwatchersig.gif


CDX_3.gif




God bless you all !



CDX-897

OT-897

WV-897

CM-2368

American Kangaroo-1897</p>
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?
  • dxBot:
    63Sprint has left the room.
  • dxBot:
    kennyjames 0151 has left the room.