Hi,
Q101 in the HR2510 = Q1 in the HR2600
Q1 is located between L1 and Ft1
For the 2600:
[ _ ] C R ( | R | [____]
( L1, Cap, Resistor, Q1, Resistor, Wire, Ft1 )
For the 2510:
[__] ( | R R [_____]
( L101, Q101, Resistor, Resistor, Ft101 )
Or for the 2510 See Chargers Site :
www.cbtricks.com/uniden/hr2510/graphics/hr2510_pb111ab_main_pcb.gif
The area is the same in both, just a slightly different layout.
Roger
</p>
Q101 in the HR2510 = Q1 in the HR2600
Q1 is located between L1 and Ft1
For the 2600:
[ _ ] C R ( | R | [____]
( L1, Cap, Resistor, Q1, Resistor, Wire, Ft1 )
For the 2510:
[__] ( | R R [_____]
( L101, Q101, Resistor, Resistor, Ft101 )
Or for the 2510 See Chargers Site :
www.cbtricks.com/uniden/hr2510/graphics/hr2510_pb111ab_main_pcb.gif
The area is the same in both, just a slightly different layout.
Roger
</p>