You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Andy....WE HAVE AUDIO!! Lol...it was the mic gain pot..I kept rereading your posts trying to figure it out so I got to thinking about how the audio circuit comes from the mic to the mic gain pot so I jumped the blue and yellow wires and I came to life, so I replaced it with one out of a old...
Ok, sorry for the delay but work beckoned, but anyways, the voltage on R70 is normal on both sides, the one thing that might help is when I was hooking it all back up on the bench, I forgot to plug in the external speaker and so while I was going over where I stopped last time, I keyed the mic...
Thank you so much, I will keep at it and let you know where I am with it, as for now, It receives audio from multiple channels, the red TX light does come on and it does show 4 watts on the dosy, the lights all work like they should and the meter swings on TX and RX, the PA does not work and I...
Ok, I finally have good clear audio from my test radio to the patient, when I key the patient I get static on the test radio but no audio, and when i look at the modulation meter when i key the patient the need bounces a little and falls right back down, but i do have a carrier, I did the test...
Ok, the board is a KEPC 060 K..
So when I'm tuning the RX and im.listening for the static or hiss, do I stop when it starts to crackle or stop when the crackling is at its loudest?
It did lose TX and had nothing on the S-meter after I messed it up but after I followed your advice I was able to get all that back but all I get is static on the test radio when I key up, the meter on the test radio swings and I get static but no audio, same thing when I let the test radio, the...
Well I followed all your advice and on the Dosey it seems everything is working but there is no modulation when I put the dosey on modulation and key up the needle raises a little and falls, but the s-meter moves on TX and RX, I'm going to recap it on Monday and see if that helps..
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.