You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
i got the swr below 2 across the board. now i am not getting any feedback when the squelch is set all the way to the left. also when i hit the ptt, the meter only goes to 1.5. so what's wrong now?
ok i must've gotten the clarifier mixed in with something else. sorry. another problem that i have been expieriencing which may help is that when the squelch is all the way to the left, i get no feedback. would this have something to do with it?
i decided to put on my 102" whip and i still have a little high swr readings. how do i bring it down? the antenna is set up on the left side of my toolbox. do i need to set it in the middle and possibly a little lower since i have a spring? also do i need to ground it? thanks!
ok i surely will in the morning. the antenna is about 3 feet away from the cab. i really don't wanna take the spring off since i park under a shed and it eases the tension of the antenna. but the swr seems to be good for now.
i was thinking about this idea but wasn't sure if the other antenna would still interfere with the one that is connected. i am just gonna go and see all the different factors that will work.
i just installed a dual phased antenna system with 4' wilson fgt fiberglass antennas with 5" hd springs. i have them mounted on each side of my toolbox. the readings that i get are well over 3 throughout the board! any suggestions?
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.