• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Recent content by Eagleeye

  1. E

    Uniden 78ltw project

    Thanks for the info friend. I did get it straightened out. I went through and checked the voltages on each wire. I had 2 wires with power on them, so that made quick work for trial and error. One gave me channel 9. So i got the other one. Lol. I tied the 2 good wires together. Sealed off the...
  2. E

    Switch mods uniden 78

    Ok, i got it. Just the 2 wires black and grey was all that needed back together, my other problems were caused by bad wiring on a roger beep. So it is fixed. Thanks for the input
  3. E

    Switch mods uniden 78

    Yeah, thats the problem. The wires were already disconnected before i could make mote of their position
  4. E

    Switch mods uniden 78

    Using the switch isnt the problem. Putting the loose wires is the problem. With everything unhooked, channel display is blank. If i tie the black with the grey it shows normal channels, if i tie black with orange, it shows ch 9. So i am sure i dont need the orange wire. Have no tx though. (Maybe...
  5. E

    Switch mods uniden 78

    I need to be able to use the ch 9 switch on a uniden 78ltw for a different mod. All wires are already removed from the switch. What needs to be done to get the normal channel functions back?
  6. E

    Uniden 78ltw project

    This may sound like a dumb question, but here goes.... The ch.9 switch has been disconnected, which is fine (im going to use the switch for something else anyway). All the wires that were connected to the swith are loose on the switch end but go to a plug on the board. Years ago, i knew how...
See more
Top Bottom
Back