You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
what is the advantage of direct sampling,
over low IF w/DSP, or, zero-IF I+Q, w/DSP.
Zero IF seems like a great way to do things...
..(except for image rejection).
Is it any better than a IC-7410?
73
Ok, lets try again...
not for a panadapter --->
as a replacement IF system, audio output, etc,
..with reason being, use the new capabilities of
DSP/SDR radio...eg, Perseus, SDRPlay, those kind of things...
and keep the other stuff from 'traditional transceiver' ( the PA and freq readout)
which I...
has anyone thought about adding
a new SDR for use as the IF,
TS930
others
I have been away from the mic and key
for a long time.
what bothers me is that a Flex3000
cost 1 grand more that the 1500,
and all more you get is a 100W PA.
Elecraft K3S, the 100 watt PA is 700bucks? Yuc
Shock and Captain...
...................
is there an issue beyond...
..
applied DC plus instantaneous RF(at the plate), shall not exceed xxKV...
or not.
please discuss.
73s
Captain KW.
how can a tube have a pulse-rating for plate voltage
that is significantly different than for DC?
a tube, or anything else...
....arcs,......... or it don't
something does not add up.
or there is more to the story.
please discuss.
73
OK.
a thread about Russian tubes was getting too long.
.......................
what is a pulse rated tube?
My understanding is.. a pulse tube has
10X or so as much cathode current emission as a 'normal' tube.
--> useable as a normal tube as long
as you heed normal (CW) limits
on the...
suppose you are trying to use a commercial band 150/170Mhz
gizmo on 2M.
my experience is.
it might peak(or notch) sort of...
but you are not transferring energy efficiently,
most of the energy is lost as VSWR reflection.
using a HT as as a signal generator,
makes things even tougher
PL tones have a long history in 2-way
commercial FM. Once upon a time,
there could be a Fm channel for dispatch,
with several unrelated base stations,
hundreds of cars each, in a close together area,
so dozens of different PL tones were needed.
Tx and RX PL tones were not necessarily the...
what are we talking about here?
ISS transmits on 145.800mhz
ISS wants to receive on 144.490
or not, is that where 1.31 comes from?
who corrects for doppler, the person receiving?
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.