You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
MARCONI i never seen the coil only just read the specs. transformer wire 22 gauge times 21 times on 1/4'' dowel now it was a usa site so i gather that it's usa gauge wire and i did look up usa wire gauge and there is more than 1 gauge system . so in the end i turned 21 turns what i...
HI MARCONI all i can tell you it was for 102 inch antenna on 11 meter band. I will try mogvz surgestion 0f using the coax it self as a rf choke 5.6 ft from antenna and 5 turns around 4.25 inch pvc pipe. this will have to wait till after my work . so all surgestions are wecome in the...
I read some where make a coil out of 22 gauge wire wraped 21 time around 1/4 '' pvc pipe and put it in serious at feed point and other end to a ground to help tune the antenna. but this does not mean much to me!!!. can some one put up a diagram in very simple terms as am new to all this .
Ok I'm Looking at a 102'' antenna and mount it to my tow bar and see how that works. it will take a while to come from the USA to Australia. I havent order it yet. what a good 102'' brand antenna ???. thanks. john
HI all i'm wanting a 27 mhz ground Indepenendent antenna as i can't get enough good metal ground plan on my ute and getting bad swr . have looked on USA ebay and can't find them would have thought there would be lots as usa still uses 27mhz alot on there trucks that are fiber glass cabs...
Think i be only running amp on lower setting at 150 watts on ssb and some times am. an not sure what you mean by CAN not have 2 watts in and have it swing to 30watts ???
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.