Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

stryker sr 955 hp version II

Rwb

Rwb

tell the devil im gettin there as fast as i can,r
Jun 30, 2018
3,835
5,095
523
69
my new 955 had the dreaded frequincy selector problem. i write the place and part number of a better 1 posted here.
somebody that cleaned my area threw several of my notes away with the selecter information.
if the poster or whoever read it can you kindly get me that information?
shop where i got mine got new 1 from stryker. it worked great 2 nites n it now wont change channels.
this is the only fault i see with my new radio
 

Rwb said:
my new 955 had the dreaded frequincy selector problem. i write the place and part number of a better 1 posted here.
somebody that cleaned my area threw several of my notes away with the selecter information.
if the poster or whoever read it can you kindly get me that information?
shop where i got mine got new 1 from stryker. it worked great 2 nites n it now wont change channels.
this is the only fault i see with my new radio
Click to expand...

To my knowledge there is no replacement channel selector for the V-2 other than the OEM. I've had mine replaced already, and the new one is not great. There is a different encoder for the V-1, but they are not interchangeable with the V2.
 
  • Like
Reactions: Rwb
Greg T said:
To my knowledge there is no replacement channel selector for the V-2 other than the OEM. I've had mine replaced already, and the new one is not great. There is a different encoder for the V-1, but they are not interchangeable with the V2.
Click to expand...
somebody posted an interchange selector not exact same but said it would work great after installing it
 
Greg T said:
HHHmmm... not aware of that for the V2. Maybe someone will come forward and explain.
Click to expand...
Im thinkin that 1 that posted it prolly got first version mixed with version 2.prolly call stryker order 2 n be done
 
Eldorado828 said:
Well you already know there is only one person that knows more about the Stryker than even those who designed and built it.... That's a question only the "Chosen one" can answer.
You'd have to venture into the land of the pixie dust to get the only real and true answer for the Stryker channel encoder.
Click to expand...

Yeah, the little soft-drive had a replacement for the V1, with his "special" knob shown on a few vids. The factory V2 selector was supposed to be a bit more robust with tighter detents. However, I have had issues with the V2, and still do shortly after replacement. They're going to have to address this situation soon.
 
  • Like
Reactions: Rwb
Greg T said:
Yeah, the little soft-drive had a replacement for the V1, with his "special" knob shown on a few vids. The factory V2 selector was supposed to be a bit more robust with tighter detents. However, I have had issues with the V2, and still do shortly after replacement. They're going to have to address this situation soon.
Click to expand...
im thinking they are full of grease. was thinkin heat gun low setting n get er warm n try. or get a new 1 n heat it up then hope grease melts
 
Question.
I don't own one of the new 955.

Do they have little swing from a low carrier like the anytone flavors?

I'd assume so being they essentially the same inside as the q5n2, but maybe they've done something different for Stryker.
 
  • Like
Reactions: Rwb
Eldorado828 said:
Question.
I don't own one of the new 955.

Do they have little swing from a low carrier like the anytone flavors?

I'd assume so being they essentially the same inside as the q5n2, but maybe they've done something different for Stryker.
Click to expand...
With the proper tweaking you make them swing as you wish. It's a matching game between the HI and LOW output power, and the HI and LOW modulation settings. Once you get the feel of setting them up, it's a breeze.
 
  • Like
Reactions: Eldorado828, Shadetree Mechanic, Rwb and 1 other person

dxChat
Help Users
  • @ BJ radionut:
    I am beginning the packing process...XENIA bound Going "Lite": this year....2 items for sale...Rig #1 = FT-920/Gud to Ex condition/Hand Mike/pwr cord/manual (NO BOX) ... #2 = My 1 owner FT-950....EX condition...Original Shipping Double Box/Factory Manual/Never used hand mike...Booths 9107-9111...Ya'al come by say hello...
  • @ BJ radionut:
    Incoming Region Produces X3 Solar Flare
    May 15, 2024 @ 14:55 UTC
    Another major solar flare, but this time from an active region just beginning to turn into view off the east limb. It is possible that the group responsible is old AR 3654 from the previous rotation. The latest flare, an X2.99 event just peaked at 14:38 UTC (May 15). Stay tuned
  • @ BJ radionut:

    Global D-Layer Absorption - Space Weather by SolarHam

    www.solarham.com www.solarham.com
  • @ ButtFuzz:
    Everything is El Dead-o. Joy!
  • @ ButtFuzz:
    Please advise me to what is a good replacement mic for my SR-497HPC... Answer: 497 is "wired like Cobra", so many choices available. That radio does not need a power mic, so purchase a stock "coffin style" mic with a decent cord, like the ones that Astatic uses. The Superstar DM-507 is my go-to. https://www.ebay.com/itm/3050474478...adANq91JSiEEnz8EGqPJRBloTgEyaVsBoCtoMQAvD_BwE $12.99 + .99 cent shipping.


      Top Bottom
      Back