You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Glad to see you got your amp working.
I just got my KL203 working today and have learned a few things. I removed the STP80NF55-06 fets which were installed as mentioned in an earlier post. These weren't working most likely due to their very high input capacitance, which probably caused an...
Are you referring to capacitor C1 in the relay circuit? That is good as the relay does close with RF applied and I did test the relay contacts to be good.
I seem to be having the same issue as arinkuddy, difference here is I've replaced all 4 blown mosfets. Had on hand new STP80NF55-06's and installed those after comparing datasheets with the IRF520. I measure 1.9Vdc at the gates which is below the 2v minimum Vgs turn on voltage.
Being new to...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.