You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
P.S. i do have a extra Motorola Programmer Laptop with a lot of the favorite RSS software running DOS. for sale if anyone want to take advantage of great surplus radio gear.........
the e chip when powered up expands cpu capacity. when the echip is uninstalled and powered up will reset back to factory specs. then reinstall the echip once again to full expansion, (that's the best way to reset cpu on the DX)
Basic , Basic , Basic. make sure the center conductor on the both ends of the pl 259's are clean. sometimes it will get coated with a film of flux. shine it up with a ruff green pad. make sure the threads are clean also. make sure there is electrical continuity between the pl 259 ground at the...
Okay lets all calm down and take some deep breaths, breath in and exhale and again breath in and exhale, there much better. now that we have released all that anger the "Public Ball Hanging" can commence. not because of anger and outrage but because it's the right thing to do...
Your right on that . pileups are only fun for a short time. when the airways get messy and the DX drops out there is always DMR. turn off the amps turn down the power supply and go digital. not really DX but one can make many contacts all over the U.S. and the world.
thanks, I would have to put you on my adoption list , and there's a few in front of you..the shack gets busy at times with the DMR's , short wave, VHF and UHF plus my favorite CB, always fun to rag chew with the locals.............
he's right on that. annealing softens the brass for proper expansion and sealing of the chamber when fired. working the brass makes it brittle heating it up to only 700 degrees softens the neck and shoulders. all military brass must show proof of annealing. however commercial brass goes back in...
very good, I agree, too much brass in the tumbler does not clean the brass well, that is a nice pocket tool and does a terrific job. I use the Lyman case prep for all my Boxer Brass. and use the RCBS deprimer for all my Berdan Brass
Holy Moly that's a lot of work ,time ,and chemicals... just a bag of walnut shells in a tumbler for an hour or so , done. and you don't have to dry the brass out........
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.