You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
First I had a call into radio shop supply and r and r both did not how to do it, both said it was marked on the board And was not later on this. Anyway I desoldered the top metal cover and pulled out unit it was packed with potting wax removed wax and found the 3 pin plug pin 1 ground pin 2 and...
Hello, has anyone replaced the EL driver in the 6 meter radio?, I have an older model that had the EL driver glued to the back side of the cpu mounting bracket, the old one has a white 2 pin connector and a brown 2 pin connector, the new EL driver from Ranger is sealed in a metal box and has one...
Thank You, I think this is going to help me now, I'm ordering parts to get started on the rebuild of this once fine machine, I will let you know how I fair. Bob
Please need a good picture of the bottom of the pc-385 around mb3756 (ic-5) , I need to repair all the traces on the board where pins rest on pc board, someone had ruined the traces by too much heat. And also around the area of board where the ta7222ap is soldered to. If I can't repair board...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.