You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
the only way for me to change frequency is to adjust L19. I tuned the radio to Channel 1 26.96550. I took a frequency reading at TP10 on AM, USB, and LSB. Checked the truth chart and I have those frequency's.
I have not made any PLL adjustments. I do have 10.240 MHz at TP13...
C81 ok, pulled and tested. C82 is missing. The SAMS shows C82 as a .047 50V, but the schematic does not show it. It also does not show on the pictures of the part locations. Not sure.
I tried my hand at the scope on TP10. I set the probe to X10 - 50V/Div, 1uS/DIV - it showed the vpp...
I have no problem with Pm. My only thing is others might benefit from our dialogue. The PLL was purchased "new" from Barkett Electronics. The VCO was from a working 148GTL. I will describe what I found when I opened the radio.
Volted final: Reversed
Opened clarifier: Reversed (looked...
I have to admit I know next to nothing about the scope. I have every other piece of equipment. I was interested in learning and a friend of mine loaned me his DSO Nano. I played around with it and got it to read frequency's. I had basic electrical engineering in college so I can read...
TP10 has 8.12
PLL Pin 7: 3.78
TR20 E: 3.4 C: 8.12 B: 4.04
C87 3.16 and 8.13
L17 8.14 and 8.14
L16 8.12 and 8.13
C86 8.13 and 0
R101 8.14 and 8.14
C89 0 and 8.13
I have the SAMS and the 2000GTL schematic
It was a typo. Pin 8 on the VCO is 8.13 RX Channel 19 AM
I only had time to post the RX as I had to leave for work:
TX Channel 19 AM (Cathode of D31 lifted - only way to TX)
PLL:
1: 6.76
2: 3.4
3: 0.03
4: 8.10
5: 8.10
6: .06
7: 4.43
8: 4.27
9: 8.17
10: 0
17: 3.78
18: 0...
When the cathode is removed from pin 6 the anode side is still high, 8 volts. The voltage does not change on L19. When the cathode is connected the anode side shows .72 volts, .18 volts on cathode side.
PLL voltages in RX with channel selector set to 19 AM:
1: 6.76 2: 3.4 3: 0.03 4...
I have a 2000 gtl that was hacked up and did not transmit. I have put everything back to normal (unlocked clarifier, extra channels, volted final). Still does not transmit, not clarifier and the channel selector does not work. If I lift the anode end of D31 I can transmit (TX and RX are both...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.