Use Kenwood MC-60A mic on Alinco DR-135T 2m

[GR599]

Has anyone used a Kenwood MC-60A desk mic with a Alinco DR-135T 2m transceiver? I am wondering what kind of modification needs to be done to the mic or mic pinout. Thanks!

 

[Dmans]

ALINCO DMR610 DR-135 DR-435.



PIN 1 MIC
PIN 2 PTT
PIN 3 DOWN
PIN 4 UP
PIN 5 +5 VOLTS
PIN 6 REMOTE CONTROL
PIN 7 SCREEN EARTH (ground)
PIN 8 GND

Mike wiring
Not a combination I am familiar with but all information from the linked website above. Use at your own risk.

73
David