B
BOOTY MONSTER
Guest
ok , so ive got it in my head to take the maco type tuning loop off my 5/8 and try a coil . i unexpectedly got some 1/4 inch copper tubing from someone last night and while sitting in my chair watching tv i made up a coil . its not finished and i still have some questions . but i think considering i just messed with it while watching tv its got potential if i really pay attention to get the spacing more correct and even .
10 warps on a 1 1/2 inch former with wire was suggest for a coil . this is 10 wraps of 1/4 inch tubing and if got it down to about a 1 5/8 inch inside diameter .... no more than 1 3/4 . if i get these coils evenly spread pretty much 1/4 of an inch apart should this work as well ? im thinking it should ..... mr coily make his ENFORCER with a big external coil and the sirio tornado does too .
10 warps on a 1 1/2 inch former with wire was suggest for a coil . this is 10 wraps of 1/4 inch tubing and if got it down to about a 1 5/8 inch inside diameter .... no more than 1 3/4 . if i get these coils evenly spread pretty much 1/4 of an inch apart should this work as well ? im thinking it should ..... mr coily make his ENFORCER with a big external coil and the sirio tornado does too .
Last edited by a moderator: