I am new to this site, searching on google has led me to this place. I have a friend who is having me look at his rci2980. It has voltage to the regulator on the board, 15 volts to the two outer pins and 7 at the center. The problem is that none of the face of the radio lights up, no freq counter, channel display, tx/rx... I suspect the issue to be the power supply board eptossb62a. R702 is completely fried beyond recognition of the value. With that being said, I have searched all over the net for a schematic that shows the value of r702 to no avail. I have found several schematics of the eptossb62a, but in all of them r702 is not used, just a spot on the board marked with no resistor shown in that location. My question is this; does anyone on here know the value of r702 or would be willing to pop the top off their 2980 to find out for me? Any help would be greatly appreciated. Thanks -Alex