You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Thank you for posting this.
The Grant LT is a 5 pin radio, btw.
I wonder if the other offerings from Shure would work instead? The schematics are a little different.
There's the 514B, the 577B, and the 596LB. The 596LB is 400 ohms - closest to matching the impedance of the Grant LT, I think...
Good Morning. I'm wondering if anyone can comment on how to wire a Shure 527 B to a 5 pin Uniden Grant? I still can't figure this out. I haven't worked on it in awhile. Previously someone posted a drawing, but I see the image isn't available for viewing any longer. Any help would be...
I want to revive this old thread. I have a Shure 527B microphone. I'm trying to wire it to a 5 Pin plug for a Uniden Grant XL/Uniden Madison.
Unfortunately, I cannot get it to work. I get squeal upon transmit. I've tried the 4.7k ohm resistor on the audio line solution, and this only...
Addendum
Just a quick addendum - I replaced both large caps on the power supply PCB with larger values to help filter out the AC, but still get significant AC hum with the volume turned down audible through the speaker. I also soldered a 3 prong AC cord, with the ground to the terminal marked...
I have a TRC-440. It's a back up radio, but sounds good & is a good performer.
I'm interested in making some minor modifications to this radio:
1.) Replace Squelch circuit with an RF Gain using the same Pot on the front of the radio.
2.) Upgrade Finals
Attached is a schematic. I'm...
I would greatly appreciate some guidance on making an RF Gain circuit for my back up radio, a Realistic TRC-440. I can email schematic, but would have to scan the document. Thanks!
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.