You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Yes, you can bypass the driver easily. Remove the resistor between input of 4 pill out the ouput of driver. Disconnect power to the driver stage. Then disconnect the coax from the variable. The center wire goes to the input of the 4 pill/ transistor section. Make sure you solder the braid of coax back to ground also. If not, tuning will be greatly affected. That's it.
Is it possible to be on a lake and have a homing directional beam being emitted from the shore so a person could navigate to that beam's source? For example at night to a jetty.
The American Radio Relay League (ARRL) is the national association for amateur radio, connecting hams around the U.S. with news, information and resources.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.