Hello I have a Cobra 21x (Uniden PC-169AB) with the "D858" PLL, I really want the entire 40 channels for this radio.
It's hard to see but I marked pin 1, and pin 24.
[photo="medium"]4340[/photo] .
Here is a "guide" I found. EDIT: It says 858 CHASSIS, I'm screwed ATM lol, data sheet 'oh where art thou?
The radio I plan on modding contains a PLL can, my question is does this look right before I start cutting traces because it looks like they used a schematic from a radio that had a (main)board mounted PLL?
[photo="medium"]4343[/photo] .
Any help would be greatly appreciated, should I just isolate pins 19/21 entirely and then proceed with the secret cb guide?.
Thanks
-Leap
It's hard to see but I marked pin 1, and pin 24.
[photo="medium"]4340[/photo] .
Here is a "guide" I found. EDIT: It says 858 CHASSIS, I'm screwed ATM lol, data sheet 'oh where art thou?
The radio I plan on modding contains a PLL can, my question is does this look right before I start cutting traces because it looks like they used a schematic from a radio that had a (main)board mounted PLL?
[photo="medium"]4343[/photo] .
Any help would be greatly appreciated, should I just isolate pins 19/21 entirely and then proceed with the secret cb guide?.
Thanks
-Leap
Last edited: