You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Was wondering what the cap and resistor mod does to the cleanliness output of the radio?
Nothing clipped and nothing stretched, turned or spread, just add the mod.
What would the output signal look like?
the resistor would determine your DK , the radio should or could swing around 20 or so , but that would depend on how you were reading the swing and with what method.
If your not going to run a amplifier with this ? A simple tune on the radio would be good to go. Those are baiscally used when amplifiers are involved. Your output signal would not look text book , but it will still get the job done.
Sometimes beauty is in the eyes and ears of others.
Please advise me to what is a good replacement mic for my SR-497HPC... Answer: 497 is "wired like Cobra", so many choices available. That radio does not need a power mic, so purchase a stock "coffin style" mic with a decent cord, like the ones that Astatic uses. The Superstar DM-507 is my go-to. https://www.ebay.com/itm/3050474478...adANq91JSiEEnz8EGqPJRBloTgEyaVsBoCtoMQAvD_BwE $12.99 + .99 cent shipping.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.