I have a DAK IX & a DAK stock mic I got from a DAK III mobile. The Mobile is a 5 pin din (like Radio Shack has) and I can't figure out how to wire the DAK stock mic to it. I looked on CB Tricks, and it didn't tell me what I need to know.
The stock mic has 5 wires:
-White
-Purple
-Red
-Black > (Maybe Shield)
-Yellow
I should have wrote down the wiring code b4 I unsoldered it from the 5 pin plug.
My DAK IX is a regular 4 pin, but it's not wired on the inside like a Cobra 4 pin.
Any help would be greatly appreciated!!!
Thanks!
73's
Bob
The stock mic has 5 wires:
-White
-Purple
-Red
-Black > (Maybe Shield)
-Yellow
I should have wrote down the wiring code b4 I unsoldered it from the 5 pin plug.
My DAK IX is a regular 4 pin, but it's not wired on the inside like a Cobra 4 pin.
Any help would be greatly appreciated!!!
Thanks!
73's
Bob
Last edited:
