Does anybody know which caps and resistors control the roger beep? On the old galaxy radio you could change them giving longer ,shorter and higher,lower pitches...Must be able to getter done on the new 95-t ??...........Thanks 
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
galaxy 95-t
- Thread starter mrcoily
- Start date
for anyone wondering this is for the older dx radios (threw dx99v)
The roger beep tone is controlled by R181 which is 220K ohms:
for a higher tone try 150K to 200K ohms
for a lower tone try 270K to 2M ohms
The roger beep time is controlled by C134 which is 2.2uF@16V DC:
for longer time try 5uF or 10uF@16V DC
for shorter time try 1uF@16V DC
The roger beep tone is controlled by R181 which is 220K ohms:
for a higher tone try 150K to 200K ohms
for a lower tone try 270K to 2M ohms
The roger beep time is controlled by C134 which is 2.2uF@16V DC:
for longer time try 5uF or 10uF@16V DC
for shorter time try 1uF@16V DC
GRTS said:
Thanks for the info will giver a shot,,i always like to have a differant beep ,,i had a 73-v that i had a long beep with very low tone sounded real nice... Galaxy should get that up on the tech page ,,on there web sight to go with the old mod...I tell you what this radio is real nice good 160 pep real easy,works great on ssb been talking all over...great radio also pulling the echo pots and replacing with 100k units and or a dual pot...anyway thanks for the info very nice radio!
