Well I just got off work this morning and thought I would start this thread before catching a nap.As discussed in the other thread,I plan to build a 4 tube 572B amp I have a cabinet that needs some paint and the first decent day I get next week it shall receive that paint.Black hammertone on the outside and a flat textured black on the inside. The front panel will be either hammertone gray or just regular gray.Here is the cabinet.Note the 12 inch ruler for scale.
Here is the loading cap I was going to use. It is 2000 pF but is too long and quite hard to modify. It has ceramic insulators holding it together and that makes it pretty hard to shorten. I have some other caps suitable for loading caps in an amp this size so it's time to find out where I stashed all my goodies.
Updates in a few days after I have a chance to get to it. I work Monday and Tuesday and then off for nine days,back for two more and off another six so I hope to get a decent start on this project.
Here is the loading cap I was going to use. It is 2000 pF but is too long and quite hard to modify. It has ceramic insulators holding it together and that makes it pretty hard to shorten. I have some other caps suitable for loading caps in an amp this size so it's time to find out where I stashed all my goodies.
Updates in a few days after I have a chance to get to it. I work Monday and Tuesday and then off for nine days,back for two more and off another six so I hope to get a decent start on this project.