Hello everyone, I'm having difficulty with the line input impedance of the circular planar antenna signal. Its impedance is 117 ohms and the correct is 50 ohms, I am not able to lower the value. I made modifications to the input increasing the line width and also made an impedance transformer. When I get it down, the whole process on the antenna I made is impaired. Example: reflection coefficient is lost, surface current loses efficiency and also its power and directivity. Please can someone help about this.
![86993109_3009369519093502_799342354937937920_n.jpg](/proxy.php?image=https%3A%2F%2Fscontent.fssz2-1.fna.fbcdn.net%2Fv%2Ft1.0-9%2F86993109_3009369519093502_799342354937937920_n.jpg%3F_nc_cat%3D100%26_nc_ohc%3Dhtop-Y5rtSsAX8pnK_e%26_nc_ht%3Dscontent.fssz2-1.fna%26oh%3D9f77e7c686276c71aa67307a378ba4eb%26oe%3D5EBCDD77&hash=27fe0c66d88a5e10a93e78bdb767aebb)