6900 board clarifier slide. this is the mod I was looking for, for the jump. it was a slide mod. not sure who did the write up on it. this might work if he does not buy a different radio. thought I would post it here incase some one else might want it.
For what it's worth,,,,I just did this one my Galaxy dx949 I do believe its the same board, and I slide down almost 7 and up just over 5
Remove D68 a 1N4148 diode.
Remove R113 a 47 ohm resistor.
Remove R153 a 2.7K resistor.
Jumper D38 a 1N4148 diode with a jumper wire.
Jumper R114 a 2.2K resistor with a jumper wire.
Run a wire from 8 volts constant to J9 pin F1.
stuck the clarifier on center and did a realignment---works really well///