What is the best thing to use for a sleeve on the cord when installing a mic jack on a small diameter cord? The cord is the same size or slightly less than the plug even fully tightened. The strain relief boots I find are not made correct for this. Does anyone make tubing specifically for this? Thanks for any information.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Mic cord sleeve
- Thread starter H1driver
- Start date
Some guys have said they use stacked up heat shrink but I personally found that gutting a black 3 wire extension cord and then using that jacket works great as well as looking original. Wallyword sells a 6' black extension cord for about 5 bucks which is what I used.
Just my $0.02
Just my $0.02
Had some mike cords that were a perfect fit for the stripped-off jacket from RG-8X "mini-8" coax. The ends that got stripped off to install a PL259 get saved for this purpose.
73
73
I second the RG8X outer jacket pieces, I used to use them in years gone past. We (shop I used to work for) used Astatic mic cords that we bought in bulk, and I used coax outer pieces (saved) for such purpose.
- No one is chatting at the moment.
-
-
@ AWP:Is it possible to be on a lake and have a homing directional beam being emitted from the shore so a person could navigate to that beam's source? For example at night to a jetty.
-
-
@ BJ radionut:
June VHF
The American Radio Relay League (ARRL) is the national association for amateur radio, connecting hams around the U.S. with news, information and resources.www.arrl.org
-