It's very nice. I am only running it on 110v for now, and seeing 1000 out on 40 meters. I have 220 ran now, and will convert the amp when time permits. It runs just barely warm when I'm jawing with the "locals" with 110 vac. I will drop the drive from the rig and try to keep output around 500-600 watts, but wanted to see what she'd do. My meter is not very accurate on the MFJ-989C, but I just ordered a Palstar AT2K today to remedy that and my troubles getting accurate tunes with the MFJ. After that, I'm pondering a heavy duty dummy load. My wife may divorce me if I spend any more money!
Sweet setup sir! Very nice radio and the amp is the icing on the cake.
I'm pondering a heavy duty dummy load.
Also, I've had quite a bit of on air help getting the audio right. I currently run the W2IHY 8 band eq and EQ Plus
I have heard their can is weak and to replace it with a Sherwin Williams one. Are the rumors unfounded?I just use the big oil can dummy load from MFJ. It's inexpensive and works great.
Julius rocks. Best customer service EVER. I just use the switches on the back to switch rigs. A little cumbersome, but it works.I run that audio stack also I also use the iPlus for switching between rigs while using the same mic/speakers. It works great.
I have heard their can is weak and to replace it with a Sherwin Williams one. Are the rumors unfounded?
Seems like a legitimate question to me, since bad seams would get oil everywhere.
Incoming Region Produces X3 Solar Flare |
May 15, 2024 @ 14:55 UTC |
Another major solar flare, but this time from an active region just beginning to turn into view off the east limb. It is possible that the group responsible is old AR 3654 from the previous rotation. The latest flare, an X2.99 event just peaked at 14:38 UTC (May 15). Stay tuned |