I have a really nice Phillipine 76XL that had no carrier or modulation. I tested the driver, 2sc1957, that was bad. I don't have any so I figured I would throw in a 2314 driver and 1969 final. BTW, the final that was in there was a 2029. After putting these in I still had no carrier or modulation. I tested IC3 and all of the voltages and frequencies and they tested good. Everything was good at Q16. When I checked the voltages at the driver and final I would get around 20 or more volts initially and then it would come down to around 13. I tested them and the driver is shot but the final tested ok, using a BK 520B tester. My question is, do I need to change some electrolytics and other stuff in order to put in the 2314/1969 combo or is there something else wrong somewhere? Thanks in advance!!