• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

POWER

HOW MUCH POWER DO YOU RUN (please Be honest)

  • 10,000- 20,000

    Votes: 0 0.0%
  • 1001-2000

    Votes: 0 0.0%
  • 2001-5000

    Votes: 0 0.0%
  • 100-500

    Votes: 0 0.0%

  • Total voters
    169

Usually about 175-200 mobile, 100-200 on the base. If I give it all I have, I can get about 400 out of my KLV-550. But I usually run a Galaxy 250 Blackface Base (2 x 2290), at right around 200.
 
I have two mobile CB radios; both out-of-the-box stock condition. I only use them when four-wheeling with friends or clubs, so the stock freqs and power are more than adequate for keeping in touch over a several mile radius.

I also have two hand-held CBs for contingency/loaner/hiking up a trail from the 4X4, etc.

For DX I go to the HF ham bands or IRLP.

Dave_W6DPS
 
" Both of my 2970s are running TS 350 HDs." Can you clarify this post? I sure as heck hope you are not running a 2970 into a Texas Star 350.
 
I found 100-200 clean watts on AM is about all I needed for mobile. Let me talk to anyone I could hear and for the most part let people who could hear me, talk back.

I ran as much as a kW for a while just to play with it, people could hear me waaaay before I could hear any of them, which was just sort of dumb.

100-200 makes CB during peak skip useful for local comms during daylight, otherwise you won't get over the noise level.
 

dxChat
Help Users
  • No one is chatting at the moment.