hi guys long time lurker nvr posted not really smart enough to add to anything you guys have to say....
i got a 2970n2 and a pred 10k on a breedlove puck and im getting some rf issue's..
i have bonded all doors with ground strap (1/2 braided tined from Georgia copper all ends soldered), the hood and the tailgate. i have upgraded the stock alt cable with 1/0 gauge along with the ground from bat to alt casing also 1/0. have bonded motor to frame i have pics if needed. the issue i get is its coming thru my stereo and also messing with my idle. now the idle on my vehicle is controlled by a idle air control valve basically it is a electric plunger that adjusts the airflow into the intake and controls the idle. it will make it go up and down about 200-300rpm in am in ssb about 100-150rpm according to my tach. i don't know what else to do to fix this issue as i cant unplug the iacv without major issue's (it controls the idle when i turn on the a/c and at 105+ most of the time a/c is a must, and it throws a ses light)
the radio is wired to the bat with 8gauge and grounded to the body, coax used is 18ft of lmr 240, swr is 1.3ish i don't have a good meter but the two i have (one being in the radio and a aries) say roughly the same.
on a good note talked to new mexico for the first time tonight...and cant wait till i get my tech to talk on 10m
thanks in advance for your help and have a good day/night...
i got a 2970n2 and a pred 10k on a breedlove puck and im getting some rf issue's..
i have bonded all doors with ground strap (1/2 braided tined from Georgia copper all ends soldered), the hood and the tailgate. i have upgraded the stock alt cable with 1/0 gauge along with the ground from bat to alt casing also 1/0. have bonded motor to frame i have pics if needed. the issue i get is its coming thru my stereo and also messing with my idle. now the idle on my vehicle is controlled by a idle air control valve basically it is a electric plunger that adjusts the airflow into the intake and controls the idle. it will make it go up and down about 200-300rpm in am in ssb about 100-150rpm according to my tach. i don't know what else to do to fix this issue as i cant unplug the iacv without major issue's (it controls the idle when i turn on the a/c and at 105+ most of the time a/c is a must, and it throws a ses light)
the radio is wired to the bat with 8gauge and grounded to the body, coax used is 18ft of lmr 240, swr is 1.3ish i don't have a good meter but the two i have (one being in the radio and a aries) say roughly the same.
on a good note talked to new mexico for the first time tonight...and cant wait till i get my tech to talk on 10m
thanks in advance for your help and have a good day/night...