has no one tried to hit there ts500DX with a 4wdk and modulate to 70w?
Hey all !! I am running a Texas Star Dx 500V and driving it with my RCI 2950.The radio DKs 2 watts and swings to 20. My swrs with the amp on are 1.2-1. Heres the deal ,i am only seeing 300 pep. i am using a Pyramid PS52 with a run of about 2 ft of #6 wire. Voltage at about 14.2 and it shows a draw of 38 amps. This is a new amp and supply,so it's got me baffled.Any ideas???????
hi im darin cb handle buster brown want to know if i can drive my ts 500v with a mod-v?If it has the black fuse holders in the back, it is a good idea to bypass them, and fuse the power leads at the Battery.
If you think about how the fuse holders are made, there is a small spring that pushes against the fuse to hold it tight in the fuse holder.
This wire spring also has to carry the current that goes through the fuse, under a heavy load these start to heat up, as they heat they start to loose the temper in the spring....so now it is starting to have lousy contact, and makes more heat, causing the spring to get softer.........and soon it will fail.
73
Jeff
Incoming Region Produces X3 Solar Flare |
May 15, 2024 @ 14:55 UTC |
Another major solar flare, but this time from an active region just beginning to turn into view off the east limb. It is possible that the group responsible is old AR 3654 from the previous rotation. The latest flare, an X2.99 event just peaked at 14:38 UTC (May 15). Stay tuned |