Uniden 640e transistor part # help

[Arcstrike]

Hey everyone,
I'm brand new on here... Hoping someone can help me out. I just acquired a Uniden 640e SSB radio. It turns on and all that good stuff but no output! Upon inspection, looks like it's missing a transistor! There are supposed to be two on the back of the chassis it seems, but only one is there. The one that is supposed to be on the left side is MIA. I can't find a schematic or service manual online for the life of me. Anybody know the part number of the missing transistor? As soon as i find out that I'll order it and get this thing back on the air! Thanks,
Zach

 

[Arcstrike]

Excuse me, the one on the right side is missing. The left one is obviously in place.

 

[Robb]

The missing part is a 2SC1969.
Looks like it is also missing the two nylon mounting screws and mica insulators that go between the transistors and the metal case.

 

[Arcstrike]

The missing part is a 2SC1969.

Excellent! Thank you Robb! Very much appreciated!

 

[Robb]

Don't buy them from ebY, as they are all counterfeits. RF Parts is the only vendor that sells real ones. Don't be fooled . . .

 

[Arcstrike]

Don't buy them from ebY, as they are all counterfeits. RF Parts is the only vendor that sells real ones. Don't be fooled . . .

Great advice. Again, much appreciated!

 

[Arcstrike]

Also, would anyone happen to know where I could find a schematic or service manual for this radio? Cbtricks.com doesn't have it

 

[sonoma]

take a look at the uniden 810 radio and the pc122 radios. they should be the same main board. look on cbtricks.com for them and compare . bet the will work to tune the radio you have. same PLL in them as you have. the 810 looks promising.

http://www.cbtricks.com/radios/uniden/pro_810e/index.htm

the realistic trc453 even looks the same on the main board.