Recent content by Boogieman

It took ,ine about 15 days. Keep on eye on QRZ.com

My rig is a Kenwood TS430s with the stock hand microphone. I came across a MFJ 901 antenna tuner. After setting the tuner for a particular frequency, do I need to retune it every time or leave it there and keep notes of the antenna freqs? I am taking the Tech test next weekend. Your...

FIXED-----------Kenwood TS430s I just got a TS430s and the dial would not dial in a freq. (the buttons on the top of the mic work) The previous owner thought it might be the encoder, so he bought a new one and included it when I bought the rig. When I changed the encoder out, I powered it...

I run Turner +2 on my RCI 2950 and I assume the wiring to be identical. #1 Black and Shield #2 White #3 Red Hope this helps you out. Boogieman

Check the directions, they are suppose to be easily modified to fit different model radios.

First...I would like to thank you guys for the replies. What I think happened, is the mic cord is the original 'heavy' one and I have my RCI 2950on a mounted on a shelf about a foot up and the cord stretched. I took the pin apart and wiggled it and plugged it back into the radio. It works...

I traded for a Turner +2 desk mic which is wired 4 pin for Cobra. Hooked it up to a Ranger 33 Super Star and everything seemed fine as far as modulation except for a little mic squeal. ( I turned down my mic gain) The next day..disconnected it and hooked it up to my RCI 2950 with the...

Make sure your excess coax is stored in a figure 8. Check your SWR's. Also, if your coax is the crimped on style, my suggestion is to take it apart get a new connector and solder it on. These are good places to start.