How hard would it be to install a plug on the back of an Omega like all the other Magnums (that I could find pictures of) Cobras, Galaxys.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Magnum plug question
- Thread starter Nomad
- Start date
It can be done, or the standard style plug can be installed in place of the white "T" plug in line.
Just do what Butcher said. I did what you're wanting to do and it was alotta work. Got the Dremel and drill out and spent
a good hour doing it! Got it all done and "said to self",wow,that
sure looks good,why didn't I just snip it off and put that darn
connector in place of the "T" connector instead????DDuuuhhhh!!
Needless to say I REALLY think things over as best as I can
now when it comes to ANY kinda modifications to a rig
Slim CDX285
a good hour doing it! Got it all done and "said to self",wow,that
sure looks good,why didn't I just snip it off and put that darn
connector in place of the "T" connector instead????DDuuuhhhh!!
Needless to say I REALLY think things over as best as I can
now when it comes to ANY kinda modifications to a rig
Slim CDX285
I've done the jack install in those a couple times, and it never took more than 15 or 20 minutes. I used one of the metal nibblers that Radio Hack used to sell. Remove the existing cord including the plastic cable holder, use the hole as a pilot hole, and go from there.
No need to cut the plug,my problem is at that plastic cable holder. The wires are messed up.
Thanks
Thanks
- No one is chatting at the moment.