You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

I assume you have no output power on AM or SSB?
I assume you have good reception and receive audio?
I assume you cannot hear any output that can be heard on a monitor radio sitting on the same bench with the 142GTL that you are working on?
I assume you have the proper collector and base voltages on the driver and the final?
And last but not least I assume the readings you are talking about are taken by properly hooking the meter up in USB mode, NO MODULATION, in BIAS current measuring/adjustment procedure mode?
Now what exactly are the measurements and if you can show us an image of the reading on the meter?
There that should clear the air a bit!

[QUOTE="OldTech03, post: 623243, member: 51291"] I assume you have no output power on AM or SSB? I assume you have good reception and receive audio? I assume you cannot hear any output that can be heard on a monitor radio sitting on the same bench with the 142GTL that you are working on? I assume you have the proper collector and base voltages on the driver and the final? And last but not least I assume the readings you are talking about are taken by properly hooking the meter up in USB mode, NO MODULATION, in BIAS current measuring/adjustment procedure mode? Now what exactly are the measurements and if you can show us an image of the reading on the meter? There that should clear the air a bit! [/QUOTE]

Top Bottom