You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I have one too, and it aligns pretty much the same way.

However, I don't align the output osc that way. I key the mic up with the radio running into a dummy load and use a sampler on the radio's output to the freq counter. Set L31 to set AM first w/o any mic gain/dead key carrier only on CH 20; should read 27.205000mhz.

Then USB/LSB using a 1khz audio tone into the mic (mic gain halfway up) to get the proper output freq set. On Ch 20 LSB, tune L30 until the radio's output reads 27.204000mhz. On CH 20 USB adjust CT2 until the radio's output reads 27.206000mhz. That simple.

http://freesound.org/people/klangfabrik/sounds/28636/

[QUOTE="Robb, post: 602339, member: 8446"] I have one too, and it aligns pretty much the same way. However, I don't align the output osc that way. I key the mic up with the radio running into a dummy load and use a sampler on the radio's output to the freq counter. Set L31 to set AM first w/o any mic gain/dead key carrier only on CH 20; should read 27.205000mhz. Then USB/LSB using a 1khz audio tone into the mic (mic gain halfway up) to get the proper output freq set. On Ch 20 [B]LSB[/B], tune L30 until the radio's output reads 27.20[B]4[/B]000mhz. On CH 20 [B]USB[/B] adjust CT2 until the radio's output reads 27.20[B]6[/B]000mhz. That simple. [URL]http://freesound.org/people/klangfabrik/sounds/28636/[/URL] [/QUOTE]

Top Bottom