You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Reply to thread

Message

For fast deploy horizontal radials get a pvc coupler and put ar t least 8 holes around its circumference.
Put short 1/4-20 screws in them from the inside so threads face outward. Put "coupling nuts" on the screw threads. Get 1/8ƛ long all thread rods and screw them into them. Connect the radials to each other, to the braid side of the coax, and to the bottom of your matching coil.
The pvc coupling can be fastened to the antenna by whatever means you wish. You can screw and unscrew those radials rather quickly.
[ATTACH=full]44053[/ATTACH] [ATTACH=full]44054[/ATTACH] [ATTACH=full]44055[/ATTACH] [ATTACH=full]44056[/ATTACH]

[QUOTE="HomerBB, post: 759718, member: 8569"] For fast deploy horizontal radials get a pvc coupler and put ar t least 8 holes around its circumference. Put short 1/4-20 screws in them from the inside so threads face outward. Put "coupling nuts" on the screw threads. Get 1/8ƛ long all thread rods and screw them into them. Connect the radials to each other, to the braid side of the coax, and to the bottom of your matching coil. The pvc coupling can be fastened to the antenna by whatever means you wish. You can screw and unscrew those radials rather quickly. [ATTACH=full]44053[/ATTACH] [ATTACH=full]44054[/ATTACH] [ATTACH=full]44055[/ATTACH] [ATTACH=full]44056[/ATTACH] [/QUOTE]

Top Bottom